A beginning

I have long had an interest in radios. A few days ago, I acquired a used Radio Shack Pro-668 off of eBay. While it's taking some getting used to, I'm starting to get the hang of it.

This blog will chronicle my radio adventures, not only with the Pro-668, but with other radios I own, such as my C. Crane Skywave.

Furthermore, I plan to begin studying again for my ham radio license. I have the book, but I put the studying aside due to other commitments. I hope to resume it and get my license!

I hope you join me on this adventure!

Comments

  1. AnonymousNovember 30, 2022 at 2:15 AM

    A spinoff of Penn National Gaming Inc. is acquiring three Live! For $1.eighty one billion, together with the newly constructed on line casino and resort in South Philadelphia, reports the Philadelphia Business Journal. Internet playing and sports betting are now 카지노 사이트 are|are actually} at the peak ...

    ReplyDelete

Post a Comment

Popular posts from this blog

My own virtual radar

Image
I'm an avgeek, so I recently setup my own  Automatic dependent surveillance – broadcast or ASD-B receiver. There are plenty around. The most common setup is to use a Raspberry Pi with a PiAware image on an SD card, an RTL-SDR and a 1090 MHz antenna. There are also more dedicated setups using hardware provided by the major ADS-B tracking websites such as FlightAware and Flightradar24 . I went the Pi route. However, instead of using the FlightAware PiAware image that's commonly available; I choose to run the ADS-B Receiver image by  Joe Prochazka . My setup consists of a Raspberry Pi 3B, a FlightAware Pro Stick Plus and a cheap $7 1090 MHz antenna. The Pro Stick Plus is nice because it's essentially a RTL-SDR USB dongle with a built in 1090MHz filter and RF amp. FlightAware also offers the regular Pro Stick which does not include a 1090 MHz filter. I used the dump1090-flightaware version of the image, although it is available with another dump1090 version called d
Read more

2019 Boston Marathon After Action

Image
Yesterday, I participated in the 123rd running of the Boston Marathon. Not as a runner mind you, but as a volunteer; specifically an amateur radio communications volunteer. Amateur radio is one of the three radio systems going during the Marathon, operating along aside public safety radios that are interoperable for the event and the commercial DMR radios that the Boston Athletic Association (BAA), the race organizers, have rented for the duration of the event. There are various roles amateurs play at the Marathon and it is divided into four segments, Start, Course, Finish and Transport. Start and Finish work obviously the start and finish line. Course, which was the segment I was assigned to, is split among the hydration and medical stations along the course and Transport works the sweep buses to pick up runners who have dropped out. Course and Finish also have Net Control Operation Centers that serve as the focal point of relaying operations for their respective segments. T
Read more

My own virtual scanner

Image
In February of this year, using a leftover Lenovo ThinkCentre M73 Tiny, that was original intended to be used a home theater PC, I made a "scanner" using it and 3 RTL-SDR USB dongles. All thanks to Luke Berndt's Trunk Recorder project . Trunk Recorder Trunk Recorder is open source software written by Luke, that using various SDRs such as the HackRF, RTL-SDR-based USB dongles and Ettus USRPs among others, allows the capture and recording of Project 25 (P25) and Motorola SmartNet trunked radio systems plus conventional systems that are P25 or analog too. It runs on Linux, macOS and even on a Raspberry Pi (although it's recommended to be a Pi 3 because the rest probably won't be able to keep up). You can either build it yourself from the source code or use Docker like I did to get it up and running. After configuring a JSON file that sets all the parameters for the instance you plan on running, a CSV file that defines the talkgroups you want to record, you
Read more